Mixer distributors – single & twin screws

TXW19XL

Real assets of a balanced and quality feed, EUROMARK TXV6/9/11/13XL & TXW16/19/22/26/30XL mixer distributors enable you to prepare mixed rations, adapted to your cattle’s needs. Thanks to their precise weighing system, our mixers range allows you to adjust rations by calculing the quantity of each component. Intuitive and highly precise, this system linked to the four load cells on the chassis enables you to weigh every ration ingredient and to have an exact management of the final mix.

The rounded-shape caisson, the position and pattern of stepped screw/s have been especially studied to ensure the products’ free flow through the machine : guarantee  of matters’ respect and of mix homogeneity. Single or twin screws, their low height (from 2m46) enables distribution in lowest buildings.

EUROMARK Vertical screws mixer distributors range is available:

  • In single screw version from 6 to 13m³ – 6m³, 9m³, 11m³ and 13m³ -, making mixers usable to all breeding, even those with little ration needs.
  • And in twin screws version from 16 to 30m³ – 16m³, 19m³, 22m³, 26m³ and 30m³ -, allowing big rations mixing.


Adapted unloading

With a great adaptability, EUROMARK mixer distributors TXV6/9/11/13XL & TXW16/19/22/26/30XL are available in various versions in order to fulfill all uses and to fit space configuration. Our single and twin vertical screws mixer distributors are delivred with different choices of unloading :

  • Lateral unloading: Right-front or left-back unloading door,
  • Transverse unloading: Front or back, right or left unloading belt.

A wide choice of options also enriches the machine’s equipment in order to ensure an efficient, powerful work tool adapted to your daily needs.

 


Quality ration affordable by all farm owners

  •  PRECISE WEIGHING

Thanks to their ultra precise weighing system, our mixers range enables you to establish the right ration adapted to each animal’s needs by calculating the quantity of each component. Every models are delivred standard with a simple electronic weighing device on 4 load cells ( functions : totale, partial and net) . The STAD 04 Plus  basic version is a programmable weighing indicator with 12 programs.

To fit your needs to the best and to closely manage the handling of your breeding, 2 additional systems are optional.

  •  A FIBRE RESPECTFUL MIX

EUROMARK mixer distributors are equiped with anti-compacting stepped screws for a homogeneous and aerated mix. Screws are made with eight or ten Long life serrated knives and with two 900mm high counter-knives manually controled (hydraulic control optionnal). Stepped conception of screws coupled with the curvy shape of the tank and with the two scrapers located on the base of the screw avoid all forms of residue in the tank : the mix is healthy, bacteria development is substantially reduced. Counter-knives are made in France with hardened steel for a long lifetime. Their asymmetrical gears ensure a clear cut even of long fodder.

  •  A CLEAR AND REGULAR DISTRIBUTION

With the right front lateral unloading version, the door position in the curved tank optimizes ration distribution and guarantees a regular flow. A spot indicator enables you to check the opening level of the trapdoor from your  tractor and therefore to regulate your distribution. The large trapdoor is equipped with adjustable deflector, which deports fodder and let your feeding alley clean.

Serial equipment

SCREW

  •  On TXV6 / 9 / 16 / 19XL : 8 Long life serrated knives per screw
  •  On TXV11 / 13 / 22 / 26 / 30XL : 10 Long life serrated knives per screw

UNLOADING

  •  Lateral : Right front or back left unloading door
  •  Transverse : Front or back, right or left unloading belt

  •  Rolled tank thickness 8mm – bottom 20mm
  •  Large section independant chassis– 4 load cells
  •  Planetary industrial two-step shaft mounted on a pre-load box
  •  Electronic weighing
  •  Single or double axle depending on models  (refer to features table)
  •  2 manually adjustable counter-knives of 900mm
  •  Hydraulic brake

  •  Inspection ladder
  •  4 control side windows
  •  Manual hydraulic stand
  •  High-adjustable drawbar
  •  Drive shaft with security bolts
  •  Road tyres
  •  DREAL 2013 Homologation (red barred attestation provided)

Optional equipment

  •  Anti-overflow ring
  •  2-speed reduction gearbox (necessary power -20%)
  •  900mm hydraulic counter-knives
  •  Sliding sheet with magnets for unloading belt
  •  Wide angle cardan
  •  Electric commands
  •  Electric speed change for 2-speed gearbox
  •  80 cm right front lateral belt, height adjustable by electric command
  •  Cable control commands
  •  Additional unloading trapdoor

  •  Battery bracket for weighing (battery non included)
  •  Flow divider if flow superior to 50l/min
  •  High strenght S650 steel wear dubbing
  •  WInscale weighing shaft
  •  Ergonomic footbridge to replace control ladder
  •  Tungsten knives
  •  Magnetic weighing display reminder
  •  Electrical power flow regulator for the distribution belt ( 1 way)
  •  Easy Control remote for weighing shaft
  •  DINA TEL 2 remote

Technical caracteristics

Mesures TXV6 - 9 - 11 - 13XL

TXV6 / 9 / 11 / 13XL – lateral or transverse unloading

TXV6XL TXV9XL TXV11XL TXV13XL
Mix capacity (m³) 8.26 9.69 11.13 13.28
Tonnage capacity (Kg) 2600 3100 4200 5000
Right front or back left lateral unloading
Overall // Long boom – A1 5.30 5.30 5.30 5.30
Overall  // Short boom – A2 5.10 5.10 5.10 5.10
Overall – B 2.12 2.12 2.12 2.12
Overall – C 2.41 2.61 2.81 3.11
Overall – D 2.66 2.66 2.66 2.66
Front or back left or right transverse unloading
Overall // Long boom – A1 5.75 / 5.47 5.75 / 5.47 5.75 / 5.47 5.75 / 5.47
Overall // Short boom – A2 5.55 / 5.27 5.55 / 5.27 5.55 / 5.27 5.55 / 5.27
Overall – B 2.11 2.11 2.11 2.11
Overall – C 2.41 2.61 2.81 3.11
Overall – D 2.5 2.5 2.5 2.5
Distribution height – Mini overall lateral unloading (mm) 350 350 350 350
Distribution height – Mini transverse belt (mm) 920 920 920 920
Distribution height – Mini reclining belt (mm) 750 750 750 750
Required tractor power in HP 70 70 70 75
Number of knives per screw 9 9 10 10
Number of counter-knives 2 2 2 2
Counter-knives height (mm) 800 800 800 800
Bottom thickness (mm) 20 20 20 20
Walls thickness (mm) 8 8 8 8
Screw’s rotation speed 540 rpm 34 34 34 34
Screw’s rotation speed 280 rpm 17 17 17 17
Weight (in Kg) with lateral distribution 4100 4250 4450 4600
Weight (in Kg) with transverse distribution 4500 4650 4850 5000
Tyres 445/45 R19.5 8 holes 445/45 R19.5 8 holes 445/45 R19.5   8 holes 445/45 R19.5   8 holes
Axle 1 axle 1 axle 1 axle 1 axle

Mesures TXW16 - 19 - 22 - 26 - 30XL

TXV16 / 19 / 22 / 26 / 30XL – lateral or transverse unloading

TXW16XL TXW19XL TXW22XL TXW26XL TXW30XL
Mix capacity (m³) 16.72 19.35 21.98 25.93 31.26
Tonnage capacity (Kg) 6300 7100 8300 10 600 12 000
Right front or back left lateral unloading
Overall // Long boom – A1 7.71 7.71 7.71 7.71 7.71
Overall // Short boom – A2 7.51 7.51 7.51 7.51 7.51
Overall – B 2.12 2.12 2.12 2.12 2.12
Overall – C 2.41 2.61 2.81 3.11 3.51
Overall – D 2.66 2.66 2.66 2.66 2.66
Déchargement transversal avant ou arrière
Hors tout // Flèche longue – A1 8.2 / 7.92 8.2 / 7.92 8.2 / 7.92 8.2 / 7.92 8.2 / 7.92
Hors tout // Flèche courte – A2 8 / 7.72 8 / 7.72 8 / 7.72 8 / 7.72 8 / 7.72
Hors tout – B 2.11 2.11 2.11 2.11 2.11
Hors tout – C 2.41 2.61 2.81 3.11 3.51
Hors tout – D 2.5 2.5 2.5 2.5 2.5
Distribution height – Mini overall lateral unloading (mm) 350 350 350 350 350
Distribution height – Mini transverse belt (mm) 920 920 920 920 920
Distribution height – Mini reclining belt (mm) 750 750 750 750 750
Required tractor power in HP 80 85 90 105 120
Number of knives per screw 9 9 10 10 10
Number of counter-knives 2 2 2 2 2
Counter-knives height (mm) 800 800 800 800 800
Bottom thickness (mm) 20 20 20 20 20
Walls thickness (mm) 8 8 8 8 8
Screw’s rotation speed // 540 rpm 34 34 34 34 34
Screw’s rotation speed // 280 rpm 17 17 17 17 17
Weight(in Kg) – lateral unloading 7100 7350 8100 8350 8600
Weight(in Kg) – transverse unloading 7300 7580 8500 8750 9000
Tyres 455/40 R22.5 10 holes 455/40 R22.5 10 holes 455/40 R22.5 10 holes 455/40 R22.5 10 holes 455/40 R22.5 10 holes
Axle 1 axle 1 axle 1 axle 2 axles 2 axles

Given information are not contractual. The manufacturer reserves the right to modify, without notice, the features of this equipment.