TX49 / 59 / 69 / 89XL


With a useful capacity going from 4m³ to 8m³, TX49 / 59 / 69 and 89XL silage feeders-straw blowers require only one tractor to mulch, silage to feed and to distribute.

Thanks to its advanced pivot pointed arm and to its articulated claw, EUROMARK silage feeders-straw blowers offer optimal silage feeding. Indeed, advanced pivot point on the front side of the machine allows a wider clearance for the claw on the silo and a better division of mechanical efforts.

With great adaptability,TX49 / 59 / 69 and 89XL silage feeders-straw blowers exist in several versions, to fit your needs and all buildings’ configurations.

EUROMARK TX49 / 59 / 69 and 89XL are thus available:

  • In lateral chute version or in double chutes version (lateral chute + 320° swivelling chute)
  • Equipped with 1 hydraulic feed rotor or 1 or 2 mechanical S.D.E. feed rotors

POWERDRIVE technology and S.D.E

Our TX49 / 59 / 69 et 89XL models can be serial equipped with mechanical feed rotors (except TX47XL = 1 rotor) and benefeciate from S.D.E. technology. This Strung Bale Distribution system guarantees you a quality mulch.

To distribute difficult products, TX30XL mounted silage feeder-straw blower can be provided with feed rotor entrainment by disengageable belt. POWERDRIVE system is an EUROMARK patented innovation (optional equipment).

An option list expands the machine’s equipement to ensure an efficient, performant work tool adapted to your daily needs.


Strengths - silage feeding and straw blowing


    The round-profil claw enables to obtain an airtighter silo front, limiting silage oxidation. Automatic reminder cleaning plate perfectly cleans the silo’s basis, reducing manual cleaning. Calculated by a  computer, the automatic-scrapper round claw allows an attack front of the clean silo, silage feeding is optimal. The arms’ kinematic has been optimised to foster silage feeding height and to allows a very advanced movement into the tank for a maximal filling. The lifting-arms actuators being outside of the tank, no obstacle disturbs loading. The claw-position indicator is serial.


TWIN blades // Bolted and balanced on the turbine disk, TWIN blades create suction and offer a very large propulsion area, so that products ( straw, silage) can be taken by a maximum centrifugal force. The spoon shape increases propulsion efficiency and guarantees perfect cleaning.

Double flow turbine // It is the heart of the machine. Thanks to its performance, mulch is regular on a great distance and distribution is fast and homogeneous. The 8 TWIN blades and their 3 supporting points on the disk offer a substantial robustness and a perfect balance.

Double flow suction // Double flow technology with air suction at the front and the back optimizes the turbine power and provides a powerful and regular flow, even long distance. EUROMARK exclusive.


30°/30° swivelling lateral chute (optional) // The swivelling lateral chute with a 30° angle on each side of the machine eases mulching and enables mulch in hard-to-access areas.

Double chutes // Lateral chute + 320° swivelling chute // To adapt to all buildings, EUROMARK silage feeders-straw blowers can be equipped with a 320° swivelling chute to mulch up to 15m far. Its 3-elements conception enables mulching on the edge of the machine. The 320° swivelling chute completes the lateral chute. Thus, the machine has two chutes.


Patented system POWERDRIVE // EUROMARK exclusive (optional) : Developing maximum power for the feed rotor, this flow system with hydraulic disengaging belt enables the separation between the turbine’s and the feed rotor’s rotation, and the belt’s movement. EUROMARK exclusive patent.This device is optionally available on TX49 / 59 / 69 et 89XL. EUROMARK exclusive patent.

Serial equipment


  • Lateral chute, mulch between 18 and 20m (according to straw quality).
  • Double chutes (lateral chute + 320° swivelling chute), mulch up to 15m (according to straw quality).


  • TX49 XL : available with 1 S.D.E. mechanical feed rotor or 1 hydraulic feed rotor
  • TX59 / 69XL : available with 1 hydraulic feed rotor or 2 S.D.E. mechanical feed rotors
  • TX89XL : only available with 2 S.D.E. mechanical feed rotors

  • 2-speed gearbox
  • Double flow turbine with 8 bolted TWIN blades
  • Bolted stainless steel carter for a direct access to the turbine
  • Lateral chute or double chutes version : lateral + 320° swivelling chutes
  • Ergonomic electric cabled commands
  • Silage feeding claw with round profile
  • Armed and clawed actuators outside the tank
  • Freewheel cardan
  • Single piece non-deformable body shell

  • Removable bottom and double bottom
  • High resistance belt with ø12mm marine chains
  • Usuary plates of 4mm below the chains and 16mm thick usuary blade in 300 Hb on the tank
  • Bearings with lubricators on belt’s shafts – bosshead made of Hardox steel
  • Cleanliness trapdoor
  • Hydraulic brake
  • TX89XL : Serial road tyres 305/70 R19.5
  • DREAL 2013 Homologation (red barred attestation provided)

Optional equipment

  • Hydraulic disengageable feed rotor – POWERDRIVE system – EUROMARK patent
  •  Bibs on claw
  •  Loading ramp with double commands
  •  Hydraulic stand with manual pump
  •  Presence sensor on the ramp
  •  Road tyres 285/70 R19.5 6 holes
  •  450l mixing hopper (except TX49XL and incompatible with hydraulic feed rotors)
  •  Moving belt regulator
  •  Mobile axle weighing
  •  Wide angle cardan (surcharged)

  • Right or left lateral spoiler
  • 30°/30° swivelling lateral chute
  • LED rotating work light
  • AÉROLIB system, to considerably limit dust while mulching
  • Difficult products’ sections
  • Cabled command
  • Open/close centre switch
  •  Flow divider (>50l/min)
  •  Hydraulic group for a machine with feed rotors equipped with POWERDRIVE system
  •  Hydraulic group for hydraulic feed rotors
  •  Stainless steel turbine’s rim

Technical caracteristics

Mesures TX49 - 59 - 69 - 89XL

Capacity (m³) 5 6.5 7.5 9
Capacity behing feed rotor (m³) 4 5.5 6.5 8
Internal machine dimensions- A 2.2 2.5 3 3.7
Internal machine dimensions B 1.36 1.46 1.46 1.46
Internal machine dimensions C 1.3 1.47 1.47 1.47
Overall – D 4.6 5 5.5 6.1
Overall E 2.3 2.4 2.4 2.4
Overall F 3.1 3.2 3.2 3.2
Height – G 2.05 2.05 2.05 2.05
Height  H 2.53 2.53 2.53 2.53
Height  I 2.96 2.96 2.96 2.96
Height  J 4 3.7 4.16 4.7
Height  K 2.04 2.04 2.04 2.04
Height  M 1.45 1.45 1.45 1.45
Weight (in Kg) 2800 3250 3500 3800
Tyres 11.5/80×15-14PR 11.5/80×15-14PR 11.5/80×15-14PR 305/70 R19.5
Axle 70mm 70mm 70mm 80mm

Technical recommendations:

  •  Flow divider is recommended for tractors with hydraulic debit superior as 50l/min.
  •  Double feed rotors are recommended for round bales to pass. 

Given information are not contractual. The manufacturer reserves the right to modify, without notice, the features of this equipment.